thecentralstation.myfreeforum.org

upnick · Engine Driver Joined: 02 Oct 2008 Posts: 1476

Hi All,

While reading up on CV's i found this NMRA guide for those unsure of their meaning.

http://www.nmra.org/standards/DCC...0Variable%20General%20Definitions
_________________

poliss · Posted: Wed Jul 29, 2009 11:49 am Post subject:

There's an easier to read guide somewhere in the forum links, but I'll be blessed if I ain't blowed if I can remember where it is.

_________________
Get off the line Bobby!
http://s160.photobucket.com/albums/t184/Poliss_album/

upnick · Engine Driver Joined: 02 Oct 2008 Posts: 1476

poliss · Posted: Wed Jul 29, 2009 12:17 pm Post subject:

Nope, it's not that one. I'll have a furkle and see if I can find it.
_________________
Get off the line Bobby!
http://s160.photobucket.com/albums/t184/Poliss_album/

poliss · Posted: Wed Jul 29, 2009 12:26 pm Post subject:

Here's the one I was thinking of. It's on the Hornby site would you beieve it. https://www.hornby.com/digital/cv,99,HAR.html

It's not as comprehensive as the NMRA page, but it's in an easier to read format. At least it's easier to read on my puter.
_________________
Get off the line Bobby!
http://s160.photobucket.com/albums/t184/Poliss_album/

upnick · Engine Driver Joined: 02 Oct 2008 Posts: 1476

Lot easier Poliss

see no mention of back EMF is made on there or is it Hornby decoders dont have the feature ?
_________________

poliss · Posted: Wed Jul 29, 2009 2:20 pm Post subject:

The Hornby decoder feature guide shows them as having back EMF, or load compensation as they call it. They should update their decoder page as it still refers to the old R8215 decoder.

_________________
Get off the line Bobby!
http://s160.photobucket.com/albums/t184/Poliss_album/