Hornby Elite Firmware Update V1.4 Posted by Hornby Customer Care on the Big H.
Elite firmware update: the update procedure has up to 3 stages
- Procedure 1: Download of the update zip file
- Procedure 2: Installation of the Elite PC Driver software. If you have updated the Elite before from this PC or are running Hornby RailMaster control software, you will not need to carry out procedure 2.
Elite: Basic Programming Procedure Posted by Hornby Customer Care on the Big H.
Writing a decoder Address:
1) Press Menu button, Loco will be displayed. Press a dial to select loco decoder programming.
2) Direct is displayed. Press a dial to select direct mode programming.
Note: rotating the dial allows access to other modes of programming, for example, ‘Reg’ and ‘Paged’. Some manufacturer’s decoders will only progra ...
With the V1.2 firmware release there have been some improvements to the user interface and other areas of operation. Please note the start-up sequence of the Select has changed i.e. the digits 12, 30, 03 will now be displayed on start up.
This corresponds to Firmware version, Hardware Version, Address loco 03.
All previous changes in version 1.1 over version 1.0 (original release) remain unless mod ...
Extensive range of model making materials, tools and accessories.
Includes modelmaking guides such as creating water effects from acrylic paste. That's a new one on me.
FAQ
Search
Memberlist
Usergroups
Join! (free) 
Profile
Log in to check your private messages
Log in